Home - Downhole Equipment - High-Impact Titanium Downhole Spring Longevity: TED-5 and Phenix-2 Field Results

High-Impact Titanium Downhole Spring Longevity: TED-5 and Phenix-2 Field Results

Written by:
An image of bottom hole springs

Titanium downhole spring longevity: Tri-Lift high-impact titanium downhole springs showed strong longevity across two multi-year field deployments. Both the TED-5 (2 3/8″) and Phenix-2 (2 7/8″) systems kept coil integrity, structural stability, and corrosion resistance after nearly three years of continuous plunger lift operation.

ModelTubing sizeInstallPullRuntimePlunger system
TED-52 3/8″4/7/202311/22/2025~960 days4-slot dart bypass
Phenix-22 7/8″3/6/202311/23/2025~992 days12″ sleeve + tungsten ball

TED-5 (2 3/8″) spring durability

After about 960 days, the TED-5 spring retained its original coil pitch, showed no signs of fatigue, and had clean, uniform wear. No deformation, corrosion, or compression scarring was observed.

Phenix-2 (2 7/8″) spring durability

The titanium fishneck showed divoting from tungsten ball strikes, but no swelling or material displacement, which points to high impact resistance. Coils stayed true with no fatigue signatures, and the flow cage showed only normal polishing. The lower cup was torn during retrieval, not during production.

Titanium downhole spring longevity summary

These long-duration deployments support Tri-Lift titanium spring systems for multi-year downhole durability. The springs held structural integrity, helped reduce maintenance cycles, and delivered reliable performance under high-cycle plunger lift conditions.

Download the full case study (PDF).